Siemens HiPath optiPoint 410 S Setup Manual page 23

Explanations:
•
_*8.
Notation for the dial sequence "*8".
•
1
Priority of this step in the extension.
•
Pickup(10&11)
If a call arrives for one of the telephones specified in the parameters, this call is picked up
as soon as the sequence detailed above is dialed. The telephones listed are checked for
their status in their order of appearance in the parameter list.
The optiPoint 410 S / optiPoint 420 S telephones feature a key function Call Pickup
>
signalling a call within a pickup group via an LED. However, in an Asterisk environ-
ment this feature is inoperable as Asterisk does not send the necessary SIP notifi-
cation.
30. June 2006
optiPoint 410/420 - Using with Asterisk, Configuration Guide
c01.fm
Call Pickup
Execution of Call Pickup
23