Voicemail; Settings In Voicemail.conf - Siemens HiPath optiPoint 410 S Setup Manual

c01.fm

Voicemail

Settings in voicemail.conf

6 Voicemail
Voicemail can be considered an answering machine or voice-based info service integrated into
Asterisk. There are two ways to notify the user of a new voice message: he receives an email
with the voice message as an attachment, and the VoiceMail Message LED on his optiPoint
starts blinking. The following section briefly describes the voicemail configuration of Asterisk.
6.1 Settings in voicemail.conf
The global section [general] contains - amongst other values - the audio formats for record-
ing voice messages.
Example:
[general]
format=wav49|gsm|wav
Explanation:
•
format
The parameter can contain a number of audio formats (of course you can also select only
one file format). The voice messages are recorded in all formats listed.
To give the user access to his mailbox, his access data have to be entered into the file voice-
mail.conf.
Example:
[myphones]
10 => 123456,10,user1@mail.com
11 => 123456,11,user2@mail.com
Erläuterungen:
•
10
Number of the mailbox. In the example, this number is the same as the phone number of
the user.
•
123456
The user password for access to the mailbox.
18
optiPoint 410/420 - Using with Asterisk, Configuration Guide
30. June 2006