Frequently Asked Questions; Disposal Instructions; Faqs - STARBUCKS Verismo Operating Manual

why is there a delay before the drink is dispensed?
The machine is adjusting to the right temperature to make your beverage.
how do I remove the pod container if it is jammed or overfilled?
Gently move the pod container back and forth while removing the container.
why isn't the beverage hot enough?
The machine may need to be descaled (refer to section "System descaling").
why is the Rinse button flashing at a fast rate for a prolonged period of time?
Try switching off the machine and unplugging the cord from the wall outlet. If this problem persists, please visit verismo.com.
why isn't the drink dispensing properly?
Ensure the handle is pressed down completely. If necessary, descale the machine (refer to section "System descaling").
why does the machine switch itself off suddenly when it is used a lot?
The machine switches itself off as protection against overheating. If it occurs, the Rinse button will blink in red while the Hot Water button will
blink simultaneously in green for about 60 seconds. The appliance will switch automatically back into ready mode (all buttons are green).
how do I reset the machine to factory settings?
Switch off the machine. Press Brewed and Rinse buttons at the same time, hold them and press the Power button for at least three seconds.
All user-programmable functions return to factory settings and the buttons flash one time for confirmation.
why does the machine switch off automatically after not being in use for more than 30 minutes?
The machine has an automatic switch-off function to save energy.
If any problems persist, contact verismo.com
The packaging is recyclable. Follow your local
guidelines when recycling.
Overview of water hardness
Hardness range Water hardness in mmol
1 (soft)
2 (medium-hard)
3 (hard)
4 (very hard)
Frequently asked
questions
Designed for beverage pods that bear the
Verismo® System logo. Also compatible with
other K-fee® System pods.
Disposal
instructions
< 1.3
1.3–2.5
2.5–3.8
> 3.8
EN
EN
13