Introduction; Safety - Sanwa MT-4 Operating Manual

INTRODUCTION

We appreciate your purchase of the new SANWA MT-4 2.4GHz FHSS-4T radio control system. This Operating Manual is
intended to acquaint you with the many unique features of your state of the art Telemetry-capable radio control system. Please
read this operating manual carefully prior to use so that you may obtain maximum success and enjoyment from the operation of
your new radio control system.
The MT-4 2.4GHz FHSS-4T radio control system has been designed for the utmost in comfort and precise control of all types of
model cars and boats. We wish you the best of success and fun with your new purchase!
Additional 2.4GHz receivers can be purchased and paired with the MT-4 transmitter through the Binding operation. Due
to differences in the implementation of 2.4GHz technology among different manufacturers, only SANWA brand 2.4GHz
FHSS-2, FHSS-3 and FHSS-4T surface receivers are compatible with your radio control system. Telemetry functions are available
only when used with Telemetry-capable receivers.

SAFETY

This is a high-output full-range radio control system that should well exceed the range needed for any surface model. For
safety, the user should perform a range test at the area of operation to ensure that the radio control system has complete
control of the model at the farthest reaches of the operational area. Rather than operating the model, we recommend that the user
enlist the help of a fellow modeler to walk the model to the farthest reaches of the track (or for boats, to walk the shore line well in
excess of the operational distance of the boat), then test for proper operation.
Be certain to read this Operating Manual in its entirety.

'Safety First' for yourself, for others, and for your equipment.

Observe all the rules of the field, track, or lake where you

operate your radio control equipment.
If at any time during the operation of your model, should

you feel or observe erratic operation or abnormality, end
your operation as quickly and safely as possible. DO NOT
operate your model again until you are certain the problem
has been corrected. TAKE NO CHANCES.
Your model can cause serious damage or injury, so please

use caution and courtesy at all times.
This radio control system operates on the 2.4GHz frequency band. The 2.4GHz connection is determined by the transmitter
and receiver pair. Unlike ordinary crystal-based systems, your model can be used without frequency control.
Do not expose the radio control system to water or excessive

moisture.
Waterproof the receiver and servos by placing them in a

water-tight radio box when operating R/C model boats.
If you have little to no experience operating R/C models, we

strongly recommend you seek the assistance of experienced
modelers or your local hobby shop for guidance.
The Low Voltage Alarm will sound when the transmitter

battery voltage drops to the minimum threshold. If this
occurs, stop using the transmitter as soon as possible,
then replace or recharge the transmitter battery.
Page 3