Bush DS-A332B Quick Manual

DS-A332B

Quick Guide

1.Unpack your DVD Player
STANDBY/ON
ACCESSORIES:
Quick Guide
Quick Guide

2.Insert remote control batteries

1) Open the cover. 2) Insert two AAA batteries.
Notes:
Do not insert batteries into the remote control in the wrong direction.
the batteries to the marks inside the battery compartment.
Do not charge, heat, open, or short-circuit the batteries. Do not throw batteries into a fire.
Do not use different types of batteries together, or mix old and new batteries.
If the remote control does not function correctly or if the operating range becomes reduced, replace all
batteries with new ones.
3.Make connections
1) Connecting to a devices with HDMI faucet (not supplied)
V.MODE
1 2 3
OSD
4 5 6
SUBTITLE
7 8 9
TITLE SEARCH
0 10+
REPEAT A-B RPT CLEAR PAL/NTSC
SETUP MENU
USER
MANUAL
ZOOM PROG
F.REV F.FWD PREV NEXT
PAUSE STEP STOP AUDIO
MUTE ANGLE VOLUME
User manual
3) Close the cover.
Make sure to match the + and - on
CR / PR
L Y CB / PB
R COAXIAL VIDEO S-VIDEO
HDMI
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
2) Connecting to a TV with Scart cable (not supplied)
To Scart input
3) Connecting to a TV with Audio/Video cable
To S-video input
To video input(yellow)
To audio inputs(red, white)
If the TV has an S-video input, connect the DVD player with an S-video cable
When using an S-video cable, do not connect the yellow video cable.
4) Connecting to a audio system and TV equipped with YUV video input
L Y CB / PB
R COAXIAL VIDEO
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
To audio inputs of the amplifier
5) Connecting to an amplifier equipped with a digital audio input and TV
L Y CB / PB
R COAXIAL VIDEO
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
To COAXIAL
type digital
audio input
Coaxial cable
CR / PR
L Y CB / PB
SCART OUTPUT
R COAXIAL VIDEO S-VIDEO
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
To Scart output
CR / PR
L Y CB / PB
R COAXIAL VIDEO S-VIDEO
2-CH AUDIO OUT DIGITAL AUDIO OUT / VIDEO OUT
To S-video output
(not supplied) .
CR / PR
S-VIDEO
To CR/PR video input
To CB/PB video input
To Y video input
CR / PR
S-VIDEO
To CR/PR video input
To CB/PB video input
To Y video input
HELPLINE: 0870 600 3030