Troubleshooting - La Crosse Technology WT-5720 Instruction Manual

TROUBLESHOOTING

Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
Note: For any questions not answered, contact La Crosse Technology with the contact
information found at the end of this instructional manual.
The Projection is faint
1) Change intensity setting
2) Use AC adapter
3) Darken surroundings
4) Use fresh batteries (if AC is not used)
The LCD is faint.
Replace the batteries.
No reception of WWVB signal.
1) It may help reception to face the front of the projection alarm
in the general direction of Ft. Collins, Colorado.
2) Wait overnight for signal.
3) Be sure the projection alarm is at least 6 feet from any
electrical devices, i.e. TV sets, computers, or other radio
controlled clocks.
4) Remove batteries for five minutes, reinsert and leave the unit
alone overnight without pressing buttons.
5) If problems persist contact La Crosse Technology.
Hour is incorrect (minute and date are correct).
Be sure correct time zone and daylight saving time are selected.
15