Network Setup - Samsung HT-J4500 User Manual

Settings
If you don't press any buttons while recording,
✎
the screen saver will be enabled.
Sound effects, such as DSP, EQ, etc., are not
✎
recorded during FM radio recording.
The radio is recorded at a set, default volume
✎
even if you change the volume or press the
button during the recording process.
MUTE
If you remove the USB device or Power Cable
✎
during the recording process, the portion of
the file which has already been recorded may
not play back.
Recording will not start if the remaining free
✎
space in the USB storage device is less than
2MB.
If the USB device is removed or has insufficient
✎
space (under 2MB), the appropriate message
is displayed and the recording stops.

Network Setup

When you connect this product to a network, you
can use network based applications and functions
such as BD-LIVE and upgrade the product's software
through the network connection.
Configuring Your Network Connection
If you skipped network setup during the Initial Setup,
follow the instructions below to configure the home
theater's network connection.
Before you begin, contact your ISP to find out if your
IP address is static or dynamic. If it is dynamic, we
recommend you use the automatic procedure below.
If it is static, you must use the manual procedure
that follows.
Before you begin, confirm that the product is
!
connected to your router with a network cable.
Automatic
Ğ
To start the configuration process, follow these
steps:
In the Home menu, select Settings, and then
1.
press the v button.
Select Network, and then press the v button.
2.
Select Wired Network Settings, and then press
3.
the v button.
The Wired Network Settings screen appears.
Press the + button on the Internet Protocol
4.
Setup menu.
Use $% button to select Auto, and then press
the v button.
Settings
Picture
Sound
Internet Protocol Setup
Network
IP Address
System
Subnet Mask
Gateway
Language
Security
DNS
General
DNS Server
Support
The Network function acquires and fills in
5.
the values for IP Address, Subnet Mask, etc.,
automatically.
After the Network function has acquired the
6.
network values, press the
Select Network Test, and then press v . The
7.
home theater validates the network connection.
When it is done, press the
Manual
Ğ
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually. You can get the
Network Settings from your Internet Service Provider
(ISP).
Settings
Picture
Sound
Internet Protocol Setup
Network
IP Address
System Subnet Mask
Gateway
Language
Security
DNS
General DNS Server
Support
Follow the first four steps in the Automatic
1.
procedure, but select Manual instead of Auto in
Step 4.
18
- English
Wired Network Settings
: Auto
0 0 0 0
:
0 0 0 0
:
0 0 0 0
:
: Auto
0 0 0 0
:
> Move " Select ' Return
button.
RETURN
button.
RETURN
Wired Network Settings
: Manual
0 0 0 0
:
255 255 255 0
:
0 0 0 0
:
: Manual
0 0 0 0
:
> Move " Select ' Return