Specifications - La Crosse Technology WT-5360U Instruction Manual

Problem:
Solution:
Note: For any questions not answered, contact La Crosse Technology with the contact information
found at the end of this instructional manual.
VII.
SPECIFICATIONS FOR WT-5360
Temperature:
Measuring range:
Checking intervals:
Power source:
AC Adapter (included)
Battery type:
Battery life:
Dimensions (L x D x H):
Projection Alarm Clock
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing
defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and
used in North America and only to the original purchaser of this product. To receive warranty service,
the purchaser must contact La Crosse Technology, Ltd for problem determination and service
procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized
service center. The original dated bill of sale must be presented upon request as proof of purchase to
La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as
stipulated herein, with new or reconditioned parts or products if found to be defective during the
limited warranty period specified above. All replaced parts and products become the property of La
Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse
Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty.
If necessary repairs are not covered by this warranty, or if a product is examined which is not in need
or repair, you will be charged for the repairs or examination. The owner must pay any shipping
charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd
2) Wait overnight for signal.
3) Be sure the projection alarm is at least 6 feet from any electrical
devices, i.e. TV sets, computers, or other radio controlled clocks.
4) Remove batteries for five minutes, reinsert and leave the unit alone
overnight without pressing buttons.
5) If problems persist contact La Crosse Technology.
Hour is incorrect (minute is correct).
Be sure correct time zone and daylight saving time are selected.
32°F to 99.9°F(0°C to +49.9°C) with 0.2°F(0.1°C)
resolution. NOTE: "OFL" will display when
temperature is out of this range.
Every 10 seconds
Input: 120VAC/60Hz Output: DC 6V/100MA
2 x AA, 1.5V (alkaline recommended) (optional)
Approximately 12 months, depending on projection
and backlight use
4.6"L x 3.67"D x 2"H
(116.7L x 51.3D x 93.1H mm)
11