Electronic Vehicle Information Center (Evic) Display Messages; Operation - Jeep Grand Cherokee 2014 Owner's Manual

Hide thumbs Also See for Grand Cherokee 2014:
Table of Contents

Advertisement

438 STARTING AND OPERATING
Refer to "Electronic Vehicle Information Center (EVIC)"
in "Understanding Your Instrument Panel" for further
information.
NOTE: This mode is intended to be enabled with engine
running.
Wheel Alignment Mode
Before performing a wheel alignment this mode must be
enabled. Refer to "Uconnect® Access Settings" in "Un-
derstanding Your Instrument Panel" for further informa-
tion.
NOTE: This mode is intended to be enabled with engine
running.
If equipped with a touch screen radio all enabling/
disabling of air suspension features must be done
through the radio. Refer to "Uconnect® Access Settings"
in "Understanding Your Instrument Panel" for further
information.
Electronic Vehicle Information Center (EVIC)
Display Messages
When the appropriate conditions exist, a message will
appear in the EVIC display. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information.
An audible chime will be heard whenever a system error
has been detected.

Operation

The indicator lamps 3 through 6 will illuminate to show
the current position of the vehicle. Flashing indicator
lamps will show a position which the system is working
to achieve. When raising, if multiple indicator lamps are
flashing on the "Up" button, the highest flashing indica-
tor lamp is the position the system is working to achieve.
When lowering, if multiple indicators are flashing on the
Up button the lowest solid indicator lamp is the posi-
tion the system is working to achieve.

Advertisement

Table of Contents
loading

Table of Contents