Program Mode; Function Keys; 12/24 Hour Time Setting; Time Zone Setting - La Crosse Technology WS-7075U Instruction Manual

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or either the IN or
the OUT buttons are pressed during programming modes the unit will
confirm/set the last information entered—the display will stop flashing and
return to normal time-date readings. If you don't leave the program mode
during the programming of sections III through VIII, you can advance to
step 3 of the next program setting. If you do leave the program setting (or
want to program a specific setting) follow each instructional step to
program that setting.
I. FUNCTION KEYS
The Secondary Buttons are located directly below the Primary Buttons, and
behind the La Crosse Technology shield on the face of the unit. To access
the Secondary Buttons: place a solid object in the slot (above the shield)
and gently pull out and down.
Primary Buttons
Secondary Buttons
II. 12 OR 24 HOUR TIME SETTING
III. TIME ZONE SETTING
1. Press and hold the SET button for 3 seconds, or until "12 h"
flashes in the DATE LCD.
2. Press the CH button to toggle between 12 and 24-hour time.
3. Press the SET button to confirm the 12/24-hour setting, and to
advance to Time Zone Setting.
The default time zone is EST, "-5hr" (Eastern Standard Time), to
change this setting:
1. Press and hold the SET button for 3 seconds, or until "12 h"
OR "24 h" flashes in the DATE LCD.
6