Machine Programming - Sanyo SFX-30 Service Manual

(5)
MACHINE
INITIAL
1.
-
2.
3.
4.
5.
6.
7.
Connect AC plug into AC outlet.
Press ~MENu key while 'SET] key is being pressed and
keep this condition at least one second.
Press :SETl .
Press SETI or IMENU .
FSE~ :"Clear all items then return to STAND-BY display.
At the same time S-RAM check is also carried out.
ml: Individual items.
Press ~ or IMENU]
~S—~ : Initialize RAM CODE and goes to the next item.
~M=] : Just goes to the next item.
Press ~ or -~ .
H : Clear one-touch and speed dial memory and goes
to the next item.
m]: Just goes to the next item.
Press ~ or 'm ,
[S= : Clear Activity report data and return to STAND-BY
display.
ml: Just return to STAND-BY display.
REMARKS
In case of S-RAM Error at step 4, alarm sounds continuously
and the machine goes
into "DEAD LOCK' condition +
Repairing is required.
(6) MACHINE PROGRAMMING
<SETTING YOUR STATION NAME AND FAX NUMBER>
1.
2.
L
3.
4.
5.
6
7,
8.
9.
Press -] 5 times.
Press ~ .
Press lml twice.
Press ~.
Enter your station name.
A maximum of 24 characters can be entered.
(See page 4)
Press ~ .
Enter your fax number.
Your fax number can be entered up to 20 digits in length.
Example 0123456
Press ~ .
Print an activity report (see page 34) to make sure that your
station name and fax number have been cwogrammed
correctly.
Jun .26 '93 12:00
INITIAL SET ?
ALL CLEAR ?
Jun .26
'93 12:00
RAM CODE CLEAR ?
O.T & S.D CLEAR?
REPORT DATA CLR?
Jun .26
'93 12:00
IS RAM CHECK ERROR I
SET MODE ?
O.T DIAL SET ?
STATION CODE SET
I
ABCDE~
012345M
Jun .26
'93 12:00
—3—