Sanyo SFX-30 Service Manual page 38

7-6. Transmission reporl
. .
It
can be set to issue or non-issue according to the setting of
the RAM CODE SW No. 31.
The initial factory preset is the non-issue position (SET CODE:
00).
SW. No. 31 :00 (Non issue)
:01 (Issue)
:02 (Issue only when the communication error
occurs.)
Once the SW No. 31 is set to 01 or 02, the transmission report
is issued accordingly.
x** -l~l~~T YXX
Jm26 '93 1231
D4E STPRT TIW PPRllWR PE RES1-T
ERROR CODE
Jm 26 1230
0'45 CWIERA 1 K
7-7. Timer transmission reporl
It can be set to issue or non-issue according to the setting of
the RAM CODE SW No. 32.
The initial factory-preset is the issue position (SET CODE 01).
SW. No. 32 :00 (Non issue)
:01 (Issue)
Once the SW. No. 32 is set to 00, timer transmission report is
not issued.
*x*Tl~_~x
xx
Jm26 '931231
SET TIME 1230
lb
STPRT PN?lWR Pm RE9.LT
kRROR COOE
1 123)
mA 1 0(
—37—