Understanding Roaming - Kyocera K342 User Manual

– tracks all calls you have
All Calls Timer
made and received. This timer cannot
be reset.
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
→
• Select
Menu Settings
→
Minute Alert Enabled
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. For more information, see page 41.

Understanding roaming

Controlling network roaming
Depending on services available from your
service provider, you may set the phone to either
digital or analog mode. This is useful if you are in
an area that borders on digital service and the
automatic feature is causing the phone to keep
switching between modes.
→
Select
1. Menu Settings
.
Digital/Analog
Select an option and press
2.
– automatically switches the
Automatic
phone between digital and analog.
– sets the phone to work in
Analog only
analog mode only.
User Guide for the Kyocera K342 Phone
→ →
Sounds
.
→ →
Network
.
– forces a call into analog mode
Analog call
for the duration of the next call.
– sets the phone to work in
Digital only
digital mode only.
Setting an alert for roaming
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
→
Select
1. Menu Settings
.
Roam/Svc Alert
Select an option and press
2.
– alerts you with three tones
When no svc
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
–
On roam change
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
– alerts you with three
On any change
increasing tones if there is a change in
roaming service or three decreasing tones
if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an incoming
call will be subject to roaming charges.
→
• Select
Menu Settings
→
Roam Ringer Enabled.
→ →
Network
.
alerts you with two
→ →
Sounds
13