Understanding Roaming - Kyocera KX444 User Manual

– —Tracks the kilobytes of
Kbyte Counter
data sent and received by your phone. It
counts only SO 33 packet data. When the
total reaches 999,999kb, the counters
reset automatically. To reset this counter
manually, highlight and press
Reset
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are on a call.
→ →
• Select
Menu Settings Sounds
→
.
Minute Alert Enabled
Receiving data or faxes
Your phone may be able to receive certain data or
faxes, depending on the system sending the
information. You cannot receive voice calls while
the phone is in data/fax mode. For more
information, see "Data settings" on page

Understanding roaming

Controlling network roaming
You may force the phone into either digital or
analog mode. This is useful if you are in an area
that borders on digital service and the automatic
feature is causing the phone to keep switching
between modes.
→ →
Select
1. Menu Settings Network
.
Digital/Analog
Select an option and press
2.
User Guide for the KX444 Phone
–
Automatic
phone between digital and analog.
–
Analog only
analog mode only.
–
Analog call
.
for the duration of the next call.
–
Digital only
digital mode only.
Setting an alert for roaming
→
You may use this setting if you want the phone to
alert you when you roam outside of your home
service area.
Select
1. Menu
Roam/Svc Alert
Select an option and press
2.
–
When no svc
41.
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
–
Roam Change
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
–
Any Change
increasing tones if there is a change in
roaming service or three decreasing tones
→
if the phone loses service.
.
automatically switches the
sets the phone to work in
forces a call into analog mode
sets the phone to work in
→ → →
Settings Network
.
.
alerts you with three tones
alerts you with two
alerts you with three
17