5.5 Indicators and Messages
Message
Corrective Action
(image FITting) flashes to indicate that a loss of raster data occurred when
the data was compressed to be fitted within the currently available memory.
Flashing
extinguishes automatically when the job times out; the printer
receives the next data from the host computer; or if you press any key on the
printer's control panel. Try adding more memory in the printer to prevent this
error.
Change of the resolution indicator from
to
(flashing) means that the
job in 600-dpi resolution was not able to run within the currently available mem-
ory. The resolution reverts to
dpi automatically when the job times out; the
printer receives the next data from the host computer; or if you press any key on
the printer's control panel. Try adding more memory in the printer to prevent this
error.
5-11