Kyocera FS-1700 User Manual page 153

Mode Select Menu
Sub Items
*1: Depending on the emulation selected, the following set>code
sets are available.
HP LaserJet 5M
ISO-6 ASCII
ISO-11 Sweden
ISO-15 Italian
ISO-17 Spain
ISO-21 Germany
ISO-60 Norway
ISO-69 France
HP Roman-8
ECMA-94 Latin 1
US Legal
IBM PC-8
IBM PC-8 (D/N)
IBM PC-850
ISO Latin 6
ISO-4 U.K.
Scalable Fonts
Only
PS math
PS text
Math8
Pi font
MS publishing
Windows
Winbalt
Desktop
ISO Latin 2
ISO Latin 5
Windows Latin 1
Windows Latin 2
Windows Latin 5
PC-775
PC-852 Latin 2
PC-1004
PC-Turkish
Macintosh
This diagram gives quick reference to the
full menu options and the sequence of
selection. Vertical movement between
delections in the diagram is achieved by the
+ and - keys; and horizontal movement by
the and keys.
1. Press the MODE key.
2. Press the + or - key repeatedly until the
message display indicates the desired
item.
3. Press the ENTER key to start changing the
setting.
4. Press the + or - key until the desired set-
ting is selected.
5. Press the ENTER key again.
If you want to abandon the setting, press
the CANCEL key instead of the ENTER key.
6. Press the EXIT key to finalize the setting
procedure. The message display returns to
Ready.
Hints
For all setteing procedures, finalize the
change by pressing ENTER.
You can use the illuminated
(CONTINUE) and (FORM FEED) keys to
move to or return from the sub items.
IBM Proprinter
X24E or Line DIABLO 630
Printer
Bitmap and Scalable Fonts
IBM US DIABLO US
IBM D/N DIABLO France
IBM PC-850 DIABLO Germany
IBM PC-860 DIABLO U.K.
IBM PC-863 DIABLO Denmark
IBM PC-865 DIABLO Sweden
US Legal DIABLO Italy
DIABLO Spain
DIABLO Japan
US Legal
EPSON LQ-850
LQ US
LQ France
LQ Germany
LQ U.K.
LQ Denmark
LQ Sweden
LQ Italy
LQ Spain
LQ Japan
LQ Norway
LQ Denmark 2
LQ Spain 2
Latin America
IBM US
IBM D/N
IBM PC-850
IBM PC-860
IBM PC-863
IBM PC-865