Table of Contents
Advertisement
Under Paper format, select User-defined.
Enter a Paper Width of 2100 and paper Paper height of 4000.
Confirm all windows with OK.
4.2 Basic settings in M-Print
The Weidmüller MultiCard is made from polyamide. One pro-
perty of this is to influence the dimensions of the MultiCard by
1% in the case of large fluctuations in the ambient conditions
(temperature and humidity).
To check the settings, switch off the fusing unit. After
checking the dimensions, you can wash the markings off
the MultiCard with water and reuse it.
Start your M-Print: Start > Programm > M-Print or click to your
link M-Print. Go to File > Plot > Settings, there you could see
the settings of the zero points, which you can change. These
figures represent typical values and must be adapted to suit
your MultiCards and your system with the help of the margin
and scaling functions in M-Print.
Choose the Device Printer EPSON Stylus COLOR 680/685.
Click to Accept and close the other window with cancel.
Connect the Weidmüller PrintJet with your PC
Setting of the zero points
If you change the zero points, it is changed for all MultiCards. If
you need a configuration for one MultiCard, please use the con-
figuration editor with the help in the M-Print.
4
You see the MultiCard frame with 5 MultiCards.
With a double click of one Card a window will open. In this win-
dow you could choose a MulitCard. Confirm you chose with
Ok.
Carry out the fine calibration with the DEK 5.5 MultiCard sup-
plied.
Select the DEK 5.5 from the menu window, label this with the
letter X (see example below) and print out the markers.
2100
4000
In the MultiCard frame you see your selected Cards with a
double click you could open it.
Label this with the letter X (see example below) and print out
the markers.
The MultiCards illustrated below show possible printing results
as produced by the PrintJet.
A
C
-
+
Compare the MultiCard with this illustration. If the type face displa-
ced, you must adjust it to your system. Calculate the difference and
change the figures margin.
File > Plot > settings
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
The marking were print on
the Project Field.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
The marking were print
beside the MultiCard.
B
X
X
X
X
X
X
X
X
+
-
The marking were print at
the and of the MultiCard.
D
-
X
X
X
X
X
X
X
X
+
The marking were print besi-
de the MultiCard.
X
X
X
X
X
X
X
X
+
X
X
X
X
X
X
X
X
Advertisement
Table of Contents
