Basic Settings For M-Print - Weidmuller PrintJet Manual

Click the Settings button, then click continue
Click OK to confirm your selections.
4.2 Basic settings in M-Print
MultiCards are made from polyamide. Polyamide reacts to fluctuations in the climate conditions (temperature and air humidity), which can
result in changes of up to 1% in the dimensions of the MultiCards. Necessary adjustments can be made in the M-Print configuration editor.
In order to check the settings, switch off the fusing unit.
You can re-use the MultiCard once you have checked the dimensions; to do so, simply wipe away the markings using a damp
cloth.
Select the software M-Print:
File > Print > Settings
Select the printer driver EPSON Stylus C 62
Set the interface to the port where the PrintJet is connected.
Check the settings for the printer's zero reference point (margins). Please refer to the section 'Setting the zero reference point'.
6
Continue
Click Advanced
- High Speed
- Black Ink Only
- Edge Smoothing