Weidmuller Printjet User Manual

Weidmuller Printjet User Manual

Hide thumbs Also See for Printjet:

Advertisement

Quick Links

Contents
1. Introduction
2. Contents of supply
4. Setting up
4.1 Configuring the PrintJet driver
11. Order data
12. CE

Sources of information

Installation Manual
This manual contains information on how to set up and begin
using the PrintJet. It also include information on configuring the
PrintJet and how to install the PrintJet software.

Users Manual

This manual provides information about operating the PrintJet.
It also includes advice on troubleshooting and information
regarding customer support.
WEIDMÜLLER PRINTJET
1. Introduction
With this manual you receive important information for
installation and starting of the PrintJet.
They find here information about execute settings in the
printer driver and in the M-Software.
For further information, Help or actual driver will find
on our Homepage:
http://www.weidmueller.de/gb/downloads/PrintJet
Question and incitations you could send us via email
printjet@weimueller.de in urgent cases you could reach
us under our service number +49 (0) 52 31 14 12 52
2. Contents of supply
Please check your PrintJet if it complete.
• PrintJet
• Feed in- and feed out rail
• Parallel printer cable
• Power cable
• Clean Unit
• Short Installation Guide
• 2 MulitCards (Typ DEK 5/5)
• CD-Rom ( Printer Driver, Software, online Manauls)
Important:
For first install you must have the Weidmüller ink cartrid-
ge Article number 1797460000.
These Article is not included in the content of supply and
must be ordered separate.
USERS MANUAL
FOR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Printjet and is the answer not in the manual?

Questions and answers

Summary of Contents for Weidmuller Printjet

  • Page 1: Table Of Contents

    This manual contains information on how to set up and begin Important: using the PrintJet. It also include information on configuring the PrintJet and how to install the PrintJet software. For first install you must have the Weidmüller ink cartrid- Users Manual ge Article number 1797460000.
  • Page 2: Safety Advice

    Read the following instructions carefully prior to using the • Do not insert your hand into the PrintJet and do not touch PrintJet for the first time. In addition, adhere to any warn- the ink cartridges while the printer is inoperation.
  • Page 3: Positioning The Printjet

    However, handle the cartridge carefully because otherwise ink can leak out. Never touch the ink outlet or the To call up the PrintJet software, open the Start menu and sel- area around it. ect Settings > Epson Stylus Color 680/685.
  • Page 4: Basic Settings In M-Print

    Click to Accept and close the other window with cancel. de the MultiCard. beside the MultiCard. Connect the Weidmüller PrintJet with your PC Setting of the zero points Compare the MultiCard with this illustration. If the type face displa- If you change the zero points, it is changed for all MultiCards. If ced, you must adjust it to your system.
  • Page 5: Printjet Control Panel

    LED 2: Operation (green LED) • Once one of the ink cartridges is empty, you cannot continue printing. The empty cartridge must first be The PrintJet is ready for operation when the green LED remains replaced before you can continue printing. on constantly. •...
  • Page 6: Error Messages

    If the printing still appears faint, you will need to test the jets. option appears under Other devices, click on Update, or dis- First, switch off the fusing unit power and stick a label over connect the USB cable from the PrintJet and then connect it to the MultiCard. the PrintJet again.
  • Page 7: Technical Specification

    Power supply: 230 V a.c., 16 A or 115 V a.c., 20 A • If you are using a USB hub, connect the PrintJet to the Ambient conditions: Office environment first hub or connect the PrintJet directly to the USB interface of the PC.
  • Page 8 For further Informationen, Support or actual drivers you could find it on our Homepage: http://www.weidmueller.de/en/downloads/software/printjet You could reach us under the E-Mail: printjet@weidmueller.de Or under the Service-number: +49 (0) 52 31-14 12 52 Deutschland Weidmüller Interface GmbH & Co. Postfach 3030 D-32720 Detmold Tel.

Table of Contents