[Quality]; [Sensitivity] - Panasonic DMC-FZ150 Lumix Basic Owner's Manual

[QUALITY]

Applicable modes:
Set the compression rate at which the pictures are to be stored.
[A]
[›]
JPEG
[ ]
RAWiJPEG
[ ]
[ ]
RAW
¢1 If you delete a RAW file from the camera, the corresponding JPEG image will also be
deleted.
¢2 It is fixed to maximum recordable pixels for each image aspect ratio.
Note
•
In [HIGH SENS.] and [FLASH BURST] in Scene Mode, this setting is fixed to [›].
•
You can enjoy more advanced picture editing if you use RAW files. You can save RAW files in a
file format (JPEG, TIFF etc.) that can be displayed on your PC etc., develop them and edit them
using the software "SILKYPIX Developer Studio" by Ichikawa Soft Laboratory on the CD-ROM
(supplied).
•
[ ] images are recorded with a smaller data volume than [
•
The following icons are displayed during the 3D recording.
[ ]: MPOiFine (
simultaneously.
[ ]: MPOiStandard (
simultaneously.

[SENSITIVITY]

•
Refer to P80 for details.
Recording
A JPEG image in which image quality was given priority.
A standard image quality JPEG image.
This is useful for increasing the number of shots without changing the
number of pixels.
You can record a RAW image and a JPEG image ([A] or [›])
¢1
simultaneously.
You can only record RAW images.
Both MPO images and fine JPEG images are recorded
)
Both MPO images and
)
- 111 -
¢2
] or [ ].
standard
JPEG images are recorded