Sony KLV-V26A10E Service Manual page 30

7) Do "Color Save".
SService Menu SService Menu
White Balance Adj.
Model/Version/ETI info.
Aging mode COLOR_TONE:
A/D Converter (Y signal) R_DRIVE:
A/D Converter (C signal) G_DRIVE
White Balance setting B_DRIVE
White Balance Adj. R_BKG:
EEPROM G_BKG:
SECAM Offset Adj. B_BKG:
Colour save
Service Service
3-3-2(a) White balance of Colour tone "Neutral".
1) Select Video input.(AV1) Items Setting data
1 CONTRAST 100(Max)
2) Adjustment Settings 2 BRIGHTNESS 50(Center)
-PICTURE_MODE = 2 (Custom) 3 DYNA_PICT 0(Off)
DC_TRAN 0
-ColorTone = 1(Neutral) 4
-Set data in right chart. 5 GAMMA 0
caution: DON'T DO ANY SAVE. U_BACKLIGHT 10(Max)
6
Input 70 IRE gray full field signal in Video input. 7 ECO_MODE 1(Standard)
8 DCI 0(Off)
3) Adjust R_DRIVE, B_DRIVE until High light adjustment value.
4) Input 20 IRE gray full field signal in Video input.
5) Adjust R_BKG, B_BKG until Low light adjustment value.
<case-1>
R_BKG=127 OK R_BKG=130 ->Shift-> 128
G_BKG=128 OK G_BKG=128 ->Shift-> 126
B_BKG=126 OK B_BKG=126 ->Shift-> 124
6) Repeat step 2) 5)
until it is in High and Low light adjusutment value.
7) Do "Color Save".
3-3-3(a) White balance of Colour tone "Warm".
1) Select Video input.(AV1) Items Setting data
CONTRAST 100(Max)
1
2) Adjustment Settings 2 BRIGHTNESS 50(Center)
-PICTURE_MODE = 2 (Custom) 3 DYNA_PICT 0(Off)
4 DC_TRAN 0
-ColorTone = 2(Warm)
GAMMA 0
-Set data in right chart. 5
caution: DON'T DO ANY SAVE. U_BACKLIGHT 10(Max)
6
ECO_MODE 1(Standard)
Input 70 IRE gray full field signal in Video input. 7
8 DCI 0(Off)
3) Adjust R_DRIVE, B_DRIVE until High light adjustment value.
4) Input 20 IRE gray full field signal in Video input.
5) Adjust R_BKG, B_BKG until Low light adjustment value.
<case-1>
R_BKG=127 OK R_BKG=130 ->Shift-> 128
G_BKG=128 OK G_BKG=128 ->Shift-> 126
B_BKG=126 OK B_BKG=126 ->Shift-> 124
6) Repeat step 2) 5)
until it is in High and Low light adjusutment value.
7) Do "Color Save".
SService Menu
White Balance Adj.
0(Cool) COLOR_TONE: 0(Cool)
130 ----------|---------- R_DRIVE: 130 ----------|----------
130 ----------|---------- G_DRIVE 130 ----------|----------
130 ----------|---------- B_DRIVE 130 ----------|----------
130 ----------|---------- R_BKG: 130 ----------|----------
130 ----------|---------- G_BKG: 130 ----------|----------
130 ----------|---------- B_BKG: 130 ----------|----------
Colour save Cancel
OK
Service
*Set in numerical order. High light adjustment value (for Neutral)
= Official CollerTemp:9300K 0MPCD
Items Setting data x y
R_DRIVE 128 0.2848 0.2932
G_DRIVE 128(Fix)
Initial B_DRIVE 128 Low light adjustment value (for Neutral)
Value R_BKG 128
= Official CollerTemp:9300K 0MPCD
G_BKG 128 x y
B_BKG 128 0.2848 0.2932
High light adjustment value (for Warm)
*Set in numerical order. = Official CollerTemp:6500 0MPCD
x y
Items Setting data 0.3135 0.3236
R_DRIVE 128
G_DRIVE 128(Fix) Low light adjustment value (for Warm)
B_DRIVE 128
Initial = Official CollerTemp:7000 0MPCD
Value R_BKG 128 x y
G_BKG 128 0.3063 0.3165
B_BKG 128
- 30 -
AT2X
RM-EA001/RM-ED001