Acer TravelMate 800 Series Service Manual page 45

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
Video Memory
Fast Boot
Power on display
LCD Auto Dim
NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
Description
Sets the system time.
Sets the system date.
This field reports the memory size of the system.
Memory size is fixed to 640MB
This field reports the memory size of the
extended memory in the system.
Extended Memory size=Total memory size-1MB
This field reports the VGA memory size of the
system. Memory size is fixed to 64MB.
Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Auto: During power on process, the system will
detect if any display device is connected on
external video port. If any external display device
is connected, the power on display will be in CRT
(or projector) only mode. Otherwise it will be in
LCD only mode.
Both: Simultaneously enable both the integrated
LCD screen and the system's external video port
(for an external CRT or projector).
Determines if the system will automatically dim
the LCD brightness in order to save power when
AC is not present.
Format/Option
Format: HH:MM:SS
(hour:minute:second) System Time
Format MM/DD/YYYY (month/day/
year)
System Date
Enabled
Option: or Disabled
Enabled or Disabled
Enabled
Option: or Disabled
37