Table of Contents
Advertisement
Select
>
2.
Menu
Settings
.
TTY Device
At the notification, select
3.
Select one of the following options:
4.
to disable TTY.
– TTY Off
to enable for TTY devices.
– TTY On
– TTY On + Talk
and voice carry over.
– TTY On + Hear
devices and hearing carry over.
Note: You can also enable TTY when you
enter
with your keypad and select
##889
Set Com Port Speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
Select
>
Menu
Settings
and a speed.
Com Port Speed
Check with your service provider for details.
Enable Hearing Aid
You can use your phone with a T-coil hearing
aid device.
Note: Enable hearing aid feature only when using
the phone with a T-coil hearing aid device.
Connect the T-coil hearing aid device to
1.
your phone.
Select
>
2.
Menu
Settings
T-coil Hearing Aid
At the notification, select
3.
60
>
>
Accessories
.
OK
to enable for TTY devices
to enable for TTY
.
TTY
>
Accessories >
>
>
Accessories
.
.
OK
Select
.
4.
Enabled
Network
Your phone has several settings for how your
phone connects to a network.
Enable Date Mode
Your phone may be able to receive certain data,
depending on the system sending the information.
You cannot receive voice calls while the phone is
in data mode. To receive data, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data mode.
Note: To purchase a cable, visit
www.kyocera-wireless.com/store
To enable data mode:
Select
>
Menu
Settings
and one of the following:
•
turns data mode off.
Voice Only
•
sets the phone to data
Data, next call
mode for the next incoming call or the
next ten minutes.
•
sets the phone to data mode
Data, until off
until the phone is turned off.
Enable Privacy Alert
Set your phone to alert you when enhanced digital
CDMA privacy is lost or regained.
Select
>
Menu
Settings
>
Privacy Alert
Enabled
.
>
>
Network
Data Calls
>
Network >
.
Network
Advertisement
Table of Contents
