Table of Contents
Advertisement
The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent
accidental key presses.
Camera lens.
1.
key raises or lowers ringer volume.
2.
Volume
key activates Camera mode. To activate camera mode,
3.
Camera
press and hold the
External screen displays time, caller ID, signal, and battery strength.
4.
Lightpipe LED.
5.
Jack for micro USB cable (sold separately).
6.
Jack for a hands-free headset (sold separately).
7.
Warning: Inserting an accessory into the incorrect jack will
damage the phone.
Lightpipe LED Behavior
Your phone's light pipe LED displays different patterns depending upon the alert. You can disable the light
pipe LED, see "Set Light Pipe Behavior" on page 54.
One flash. If you do not respond, your phone will flash again to remind you.
New message
Heartbeat pulse. It will continue until you answer the phone or miss the call.
Incoming call
One flash. If you do not respond, your phone will flash again to remind you.
Missed call
Wave pulse. It will continue until the call ends.
In call
Three flashes. It will continue until you respond to the alert.
Alarm
Three flashes. It will continue until you respond to the alert.
Scheduler
One flash. It will continue until you respond to Bluetooth request.
Bluetooth
One flash. It will continue until you charge the phone.
Low battery
Wave pulse. Displays when the phone is being charged.
Charging
Note: Incoming emergency calls always activate the LED, even if you have disabled it.
User Guide
key.
Camera
13
Advertisement
Table of Contents
