Voice Command Settings - Kyocera Lingo M1000 User Manual

If the phone finds multiple voice tags that
sound like the name you said, the phone lists
the names and asks you to verify which name
you want to call. Say "Yes" when you hear the
correct name. Say "No" when you hear an
incorrect name.
3. Press the key to end the call.
End
Call Using Digit Dial
When using digit dialing, you speak digits to dial a
phone number.
Note: You cannot speak a string of digits. You
must speak one digit at a time and wait for
the prompt.
1. From the home screen, press the
The phone prompts, "Say a name or say
dial".
2. Say "Dial". The phone responds "Speak
a digit".
3. Speak the first digit of the phone number you
want to call. Once the phone repeats the
digit, you can speak the next digit.
If you pause, the phone prompts you with
one of the following options. After the
prompt, speak an option:
– Say "Clear" to erase the last digit entered.
The phone responds: "Digit cleared." To
clear the entire phone number, say
"Clear" again. When the phone prompts
you with "Clear entire phone number?",
say "Yes" to clear or "No" to cancel.
70
4. Press the

Voice Command Settings

To customize the voice commands,
see "Voice Features" on page 60.
key.
Call
– Say "Call" to dial the number.
– Say "Verify" to cause phone to repeat the
set of digits you input.
– Say "Cancel" to exit voice recognizer and
return to the home screen.
– Speak a digit to enter the next digit. Once
the phone repeats the digit, you can
speak the next digit or pause to hear the
prompt.
key to end the call.
End
Voice Command Settings