Table of Contents
Advertisement
Connect to TTY Device
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1.
Connect the TTY device to your phone.
2.
TTY Device
From
the notification.
3.
Select one of the following:.
– TTY Off
disables TTY.
– TTY On
enables TTY devices.
– TTY On + Talk
voice carry over.
– TTY On + Hear
hearing carry over.
Note: You can also enter
TTY
keypad and select
Connect to Hearing Aid Device
With a T-coil hearing aid device connected, you
can enable the hearing aid feature.
1.
Connect the T-coil hearing aid device to
your phone.
2.
Hearing Aid
From
58
OK
, select
to clear
enables TTY devices and
enables TTY devices and
##889
with your
to enable TTY.
>
OK
Enabled
, select
Network
Enable Roaming Service Alert
Use this setting if you want the phone to alert
you when you roam outside of your home
service area.
Roam/Svc Alert
From
• Disabled
• When no svc
decreasing in pitch when service is lost and
three tones increasing in pitch when service is
acquired again.
• On roam change
decreasing tones when roaming service is
acquired and three increasing tones when
home area service is acquired again.
• On any change
increasing tones if there is a change in
roaming service or three decreasing tones if
the phone loses service.
Set Roaming Restrictions
You can restrict your phone from making a
call when roaming.
Roam Option
From
.
No Roaming
roaming) or
, select one of the following:
turns roaming service alert off.
alerts you with three tones
alerts you with two
alerts you with three
Automatic
, select
(to disallow roaming).
(to allow
Advertisement
Table of Contents
