the phone to a laptop or PC and switch the phone from voice mode to data/
fax mode.
Note: To purchase a cable, contact your service provider, call (800) 349-4188
(U.S.A. only) or (858) 882-1410, or visit www.kyocera-wireless.com/store.
1. Connect the phone to the laptop or PC. (See "Setting Com port speed.")
2. Set the Com Speed.
3. Select Menu
Data/Fax Calls.
4. Press
to select an option:
–
Voice only—Allow only voice calls.
–
Fax next call or Data next call—Set the phone to fax mode or data mode
for the next incoming call or the next 10 minutes.
–
Fax until off or Data until off—Force the phone into fax mode or data
mode until the phone is turned off.
Note: You cannot receive voice calls while the phone is in data/fax mode.
User Guide for the Kyocera K490 phone
→
→
Settings
Network
→
79