Page 2
Introduction The VMS Touring 700HDs navigates just as well in the outback as it does around town! Ideal for exploring the outback, the Touring Series features three of Australia’s most popular map collections. The Gregory’s range of activity maps are ideal for locating points of interest and activi- ties to see and do.
Contents Introduction......................... 1. What’s in the Box......................4 2. Device illustration......................4 3. Prepare device for use 3.1 Inserting SD memory card................5 3.2 Mounting the device..................5 3.3 Power ON/OFF....................4. Device Main Menu ......................5. GPS Console........................5.1 Choosing off road navigation software............6.
1. WHAT’S IN THE BOX - 1 x VMS Touring Series GPS unit - 1 x 12-24V DC charger - 1 x Windscreen suction cup mount - 1 x USB Cable - 1 x Stylus pen - 1 x Quick Start Guide...
3.1 INSERTING SD MEMORY CARD Step 1: Remove SD card from its plastic holder. Step 2: Locate the SD card slot on the right side of the DEVICE. Step 3: Ensure orientation of the SD card is correct. Step 4: Insert the SD card by sliding it gently into the slot completely. The card will click indicating correct installation.
quick start guide 4. DEVICE MAIN MENU 1. Device Volume options 2. Power Options 3. Photos, Videos 4. Display backlight options 5. Device Date/Tim options 6. About this device 7. Start GPS Console 9. Battery status 100% Charging 5. GPS CONSOLE - Starting Navigation Software The GPS console is where you can select to start Street or Off road navigation software.
For help and guides on topographic software, please refer to the GPS NAVIGATION USER GUIDE included with this product or visit our website www.vms4x4.com/vms_support 7. Reverse Camera Setup This device has the capability to display reverse camera images from up to two VMS cameras Setting up reverse camera Camera Video Inpu t...
Installation of cameras: For camera installation procedures, please refer to the instructions included with the camera kits. NOTE: the Touring Series has been tested to operate with VMS reverse camera kits. We can- not ensure compatibility with third party camera kits.
Do not remove or attempt to remove the battery. 9.2 MAP DATA MAP DATA INFORMATION: One of the goals of the VMS Touring GPS is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. Along with VMS’ extensive field work, we use a combination of governmental and private data sources, which...
Some states do not allow the exclusion of incidental or consequential damages, so the above limita- tions may not apply to you. VMS retains the exclusive right to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
& New Zealand. This warranty is provided by the local in-country distributor and this distributor provides local service for your unit. Distributor warranties are only valid in the area of intended distri- bution. Units purchased in Australia or New Zealand must be returned to the VMS service centre in Australia.
(the “software”) in binary executable form in the normal operation of the product. Title, owner- ship rights, and intellectual property rights in and to the software remains in VMS & it’s partners. You acknowledge that the Software is the property of VMS & it’s partners and is protected under Australia copyright laws and international copyright treaties.
Page 13
THIS PAGE HAS BEEN INTENTIONALLY LEFT AS BLANK...
Need help?
Do you have a question about the Touring 700HDs and is the answer not in the manual?
Questions and answers