Hookups; Hooking Up The Player; Step 1: Unpacking; Step 2: Inserting Batteries Into The Remote - Sony DVP-NS330 Service Manual

Displaying the Control Bar in
stop mode
The following displays appear when the
DISPLAY button is repeatedly pressed
during stop mode. You can make basic
adjustments and customize the player to suit
your viewing preferences.
NDisplay 1
The following settings can be made.
QUICK
A
SETUP (53)
• Select QUICK to make the minimum
number of basic adjustments for using the
player.
• Select CUSTOM to make a full range of
adjustments.
• Select RESET to return the SETUP
adjustments to the default settings.
B
PARENTAL CONTROL (47)
• Set this to limit the playback of selected
discs on this player.
m
NDisplay 2
Shows the same information as Display 1
during playback.
CHAPTER
m

Step 3: Connecting the Video Cords

Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
A
INPUT
(yellow)
Audio/video cord
VIDEO
(supplied)
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
(yellow)
(green)
to LINE OUT (VIDEO)
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL R-AUDIO-L VIDEO Y P B P R
CD/DVD player
to S VIDEO OUT
S VIDEO cord (not supplied)
l : Signal flow
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Yellow (Video)
White (L)
Red (R)
Use the red and white plugs to connect to the audio input jacks (page 18). (Do this if you are
connecting to a TV only.)
NDisplay 3
Shows the same information as Display 2
during playback.
m
NDisplay 4
Shows the same information as Display 3
during playback.
DVD T41 – 8 T 1:01:57
m
NNo display
m
NReturn to Display 1
13
C
Component COMPONENT
VIDEO IN
video cord
Y
(not supplied)
(green)
P
B
(blue)
P
R
(red)
TV, projector, or AV
amplifier (receiver)
(red)
to COMPONENT
(blue)
VIDEO OUT
INPUT
S VIDEO
B
TV, projector, or AV
amplifier (receiver)
Yellow (Video)
White (L)
Red (R)
,continued
15

Hookups

Hooking Up the Player

Follow Steps 1 to 6 to hook up and adjust the settings of the player.
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this player to a TV that does not have a video input jack.
• Be sure to disconnect the power of each component before connecting.

Step 1: Unpacking

Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug × 3) (1)
• Remote commander (remote) (1)
• Size AA (R6) batteries (2)
• A plug adaptor is included with some models.

Step 2: Inserting Batteries into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
14
B If you are connecting to an S VIDEO input jack
Connect the S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
Green
Blue
Red
When connecting to a wide screen TV
Depending on the disc, the image may not fit your TV screen. If you want to change the aspect
ratio, please refer to page 55.
Note
Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen.
CD/DVD player
16
1-3
on the player.
, P )
B R
Green
Blue
Red
VCR
TV
Connect
directly