Step 4: Connecting The Audio Cords - Sony DVP-NS330 Service Manual

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections, through
A
Components to be connected
TV
• Surround effects: TVS DYNAMIC (page 41),
TVS WIDE (page 41)
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 41)
or
MD deck/DAT deck
• Surround effects: TVS STANDARD (page 41).
AV amplifier (receiver) having a Dolby*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 62)
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS** decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 62)
– DTS (5.1ch) (page 62)
* Manufactured under license from Dolby
Laboratories. "Dolby," "Pro Logic," and the
double-D symbol are trademarks of Dolby
Laboratories.
** "DTS" and "DTS Digital Out" are trademarks
of Digital Theater Systems, Inc.
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
B
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL R-AUDIO-L VIDEO Y P B P R
B-2
Coaxial digital
Stereo audio cord
cord (not supplied)
DIGITAL OUT
(not supplied)
PCM/DTS/
DOLBY DIGITAL
or
COAXIAL
to DIGITAL OUT
(COAXIAL)
(white)
to coaxial digital input
[Speakers]
Stereo amplifier (receiver)
Front (L)
Front (R)
l: Signal flow
.
D
Connection Your setup (example)
(page 18)
A
(page 19)
B
(page 20)
C
(page 21)
D
,continued
17
. If the amplifier
B-1
.
B-2
B-1
LINE OUT
(white)
R-AUDIO-L
VIDEO
(red)
to LINE OUT L/R (AUDIO)
(red)
to audio input
MD deck/DAT deck
,continued
19
Connecting to your TV
A
This connection will use your TV speakers for sound.
CD/DVD player
DIGITAL OUT LINE OUT S VIDEO COMPONENT VIDEO OUT
OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL R-AUDIO-L VIDEO Y
A
LINE OUT
(yellow)*
(white)
R-AUDIO-L VIDEO
(red)
to LINE OUT L/R
(AUDIO)
l : Signal flow
* The yellow plug is used for video signals (page
15).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) jacks to the TV's audio
input jack.
18
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
C
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
CD/DVD player
DIGITAL OUT LINE OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL R-AUDIO-L
C-2
Coaxial digital cord
(not supplied)
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
to DIGITAL OUT
(COAXIAL)
to coaxial digital input
[Speakers]
Rear (L) Rear (R)
Subwoofer
l: Signal flow
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
20
1-4
P B P R
TV
(yellow)*
(white)
(red)
Audio/video
cord (supplied)
to audio input
. If your amplifier
C-1
.
C-2
S VIDEO COMPONENT VIDEO OUT
OUT
VIDEO Y P B P R
Stereo
audio cord (not
LINE OUT
(white)
supplied)
or (red) R-AUDIO-L
to LINE OUT L/R (AUDIO)
(white) (red)
to audio input
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Front (L)
Center
Rear (mono)
C-1
VIDEO
Front (R)