Inserting And Removing A Disc - Magicbook SHB-V7S6 User Manual

Inserting and Removing a Disc

Follow this procedure to insert or remove a disc:
1. Turn on the computer.
2. Press the eject button and the DVD tray will slide out partially.
Gently pull on it until it is fully extended.
3. To insert a disc, place down the disc in the tray with its label facing
up. Slightly press the center of the DVD tray until it clicks into place.
To remove a disc, hold the disc by its outer edge and lift it up from the
tray.
4. Gently push the tray back into the drive.
NOTE: In the unlikely event that you are unable to release the DVD tray by pressing the
eject button, you can manually release the disc. (See "DVD Drive Problems" in Chapter
8.)
2-14
Eject Button
Operating Your Computer