Page 2
TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.
Table of Contents Preface .................. v Notational Conventions ............. vi Chapter 1 Getting Started .............1-1 Getting the Computer Running..........1-2 Unpacking ................1-2 Connecting to AC Power ...........1-2 Opening the Cover .............1-3 Turning On and Off the Computer........1-4 Taking a Look at the Computer ..........1-6 Right-Side Components .............1-6 Left-Side Components ............1-7 Rear Components...............1-8...
Page 4
Euro Symbol ..............2-7 Windows Keys ..............2-7 Function Keys ..............2-8 Fn Key................2-8 Hot Keys ................2-8 Using the Touchpad ...............2-10 Configuring the Touchpad ..........2-12 Using the DVD Drive ............2-13 Inserting and Removing a Disc ........2-14 Using the Video Features............2-15 Configuring the Display Modes ........2-15 Using the Audio Features ............2-16 Connecting Audio Devices ..........2-17 Using the Communication Features........2-18...
Page 5
CardBus Support..............4-4 Inserting and Removing a PC Card........4-4 Internal Components Upgrade..........4-6 Chapter 5 Using BIOS Setup ..........5-1 When and How to Use BIOS Setup.........5-2 When to Use...............5-2 Starting BIOS Setup............5-2 Moving Around and Making Selections ......5-3 Startup Menu ................5-4 Chipset Menu................5-5 Boot Menu ................5-6 Exit Menu ................5-7 Chapter 6 Installing Software Drivers........6-1...
Page 6
Hardware Device Problems..........8-6 Hard Disk Drive Problems ..........8-7 Keyboard, Mouse, and Touchpad Problems ......8-7 LAN Problems ..............8-8 WLAN Problems..............8-8 Modem Problems ...............8-9 PC Card Problems ............8-10 Power Management Problems..........8-10 Software Problems ............8-11 Sound Problems ...............8-11 Startup Problems ..............8-12 Other Problems..............8-13 Resetting the Computer ............8-14 Appendix A Specifications............
Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters, 2 appendices, and an index. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features.
Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information that, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset.
CHAPTER Getting Started Congratulations on purchasing this computer. Your computer incorporates desktop computer capabilities into a compact notebook-sized package. It can greatly enhance your productivity either in the office or at home. And, of course, wherever you need it, the computer is ready and easy “to go.” This chapter first tells you step by step how to get the computer up and running.
Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord −...
4. When the AC adapter is connected, power is being supplied from the electrical outlet to the AC adapter and onto your computer. Now, you are ready to turn on the computer. CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer.
Turning On and Off the Computer Turning On 1. Make sure that the computer is connected to AC power. 2. Press the power button. 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Getting Started...
Turning Off To turn off the computer power, use the “Shut Down” command of your operating system. NOTE: There are other ways you can stop the computer so that you will be back to where you left off when you next turn on the computer. (See “Stopping the Computer” in Chapter 2 for information.) CAUTION: If you have to turn the computer on again immediately after turning it off, wait for at least five seconds.
Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. Right-Side Components Component Description...
Left-Side Components Component Description See Also Connects an external monitor. P. 4-2 VGA Port USB Port Connects a USB device, such as a floppy disk P. 4-3 drive, printer, digital camera, joystick, and more. Ventilation Do not cover or block the ventilation openings Openings for air circulation thus preventing overheating.
Rear Components Component Description See Also Kensington Locks the computer to a stationery object for P. 7-2 security. Lock Power Connects the AC adapter. P. 1-2 Connector Each of the two ports connects a USB device, P. 4-3 USB Ports such as a floppy disk drive, printer, digital camera, joystick, and more.
Front Components Component Description See Also Locks the top cover. P. 1-3 Top Cover Latch Connects a set of headphones, external speakers P. 2-17 Audio Output with amplifier, an audio recording device, or an Connector SPDIF S/PDIF device such as a digital speaker set for digital audio output.
Bottom Components Component Description See Also Battery Pack Supplies power to your computer when external P. 3-3 power is not connected. Inside is the hard disk drive of your computer. Hard Disk Drive Compartment Inside is the memory slot for expanding the P.
Top-open Components Component Description See Also LCD Screen Displays the output of the computer. P. 2-15 Glows green when the computer is using battery P. 3-6 Battery Power power. Indicator Blinks green when the computer, using battery power, is in Standby mode. Battery Charge Glows green when the battery is fully charged P.
Page 20
Component Description See Also AC Power Glows green when the computer is using AC P. 3-2 power. Indicator Blinks green when the computer, using AC power, is in Standby mode. Stereo Speaker Sends out sound and voice from the computer. P.
Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose... Do this... To know more about the computer... Go on to the next chapter. To install the operating system if your See the operating system manual.
CHAPTER Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer.
Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk and floppy disk.
Page 25
To stop in Do this... To start up or this mode... resume again Hibernation Depending on your settings in Windows, Press the power you can put the computer in Hibernation button. mode by: • Closing the display cover • Pressing Fn+F12 •...
Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys...
Description Pressing Fn and this key toggles Scroll Lock on and off. When on light on), the screen moves one line up or down when you press ↑ or ↓ arrow key. Scroll Lock does not work for all programs. Pressing this key toggles the Caps Lock on and off.
Description Moves the cursor left one space. Moves the cursor right one space. Moves the cursor up one line. Moves the cursor down one line. Moves the page up. Moves the page down. Moves the cursor to the beginning of the line or document. Moves the cursor to the end of the line or document.
Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated, which means you can use these keys to enter numerals. NOTES: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can either turn Num Lock off or you can press and then the letter without turning Num Lock off.
Function Keys On the top row of the keys are the function keys: . Function keys are multi-purpose keys that perform functions defined by individual programs. Hot key functions are assigned to , and by your computer. (See “Hot Keys” later in this chapter for information.) Fn Key key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key.
Page 31
Description Switches the display output to one of the following when an external device is connected. Upon booting the system with CRT: LCD & CRT NOTES: If the display mode is set to 256 colors or lower, or in DOS mode, there will be only two modes for selecting: CRT only and LCD &...
Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
Page 33
Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or–...
Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.
Using the DVD Drive Your computer comes with a DVD drive, usually configured as drive D. Depending on the model, your drive is one of the following: Combo drive can work both as a DVD-ROM drive for reading DVD (Digital Versatile Disc) discs in addition to CDs, audio CDs and CD–R/–RW discs, and CD–RW drive writing to CD–R/–RW discs.
Inserting and Removing a Disc Follow this procedure to insert or remove a disc: 1. Turn on the computer. 2. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended. 3.
Using the Video Features The video subsystem of your computer features: 15.4 / 14.1-inch TFT (Thin-Film Transistor) color LCD display with 1280 800 WXGA resolution × Simultaneous display on LCD and external monitor, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
Using the Audio Features NOTES: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed. If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: Digital audio and analog mixing functions required for recording and playing sound on your computer Sound Blaster Pro compatibility...
Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. NOTE: After connecting an external audio device, make sure that you specify the use of the correct audio device in Windows XP. Audio Output Connector ( ) can be connected to the line-in SPDIF connector of powered speakers with built-in amplifiers, headphones,...
Using the Communication Features Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer must be installed. The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board.
Using the LAN NOTE: To take advantage of the LAN feature, the LAN driver supplied with your computer must be installed. The internal 100Base-TX LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 100 Mbps.
Using the Wireless LAN Depending on your model, an internal Mini PCI wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include: IEEE 802.11b, 802.11g standard compliance 2.4 GHz DSSS (Direct Sequence Spread Spectrum) technology...
It takes approximately 30 seconds for your computer to make a successful WLAN connection and approximately 10 seconds to disconnect. Connecting to a Wireless Network 1. Make sure that the WLAN indicator ( ) is on. 2. Double-click the Wireless Network Connection icon located on your Windows system tray.
CHAPTER Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. The topics in this chapter include: What is an AC adapter How to charge the battery pack...
AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer.
Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.
Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging.
Page 49
If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To replace the battery pack, follow these steps: 1.
Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10 % (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Charge Indicator ( ) blinks red to alert you to take actions. NOTE: You can set up your threshold and signals of Battery Low under Windows.
Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows XP, power supply to different computer components is controlled on an as-needed basis.
Hibernation NOTE: Make sure that the hibernation feature is enabled in the Hibernate tab of the Power Options Properties from the Control Panel in Windows XP. Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the system can be turned off.
Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. If you work with an application that uses a PC card, exit the application when you finish using it.
CHAPTER Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: External monitor USB device PC card...
Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.
Connecting a USB Device Your computer has three USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. USB is specified to be an industry standard extension to the PC architecture.
Using PC Cards Your computer has a PC card slot. PC cards are credit card-sized peripheral products based on the standards developed by PCMCIA (Personal Computer Memory Card International Association). PCMCIA is a non-profit association for promoting the interchangeability among mobile computers where ruggedness, low power, and small size are critical.
Page 59
Eject Button 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click on the Safely Remove Hardware icon found on the Windows XP taskbar and the Safely Remove Hardware window appears on screen.
Internal Components Upgrade You can upgrade your computer by changing the CPU or adding memory. However, to avoid damage during the installation procedure, please ask your dealer for help. Do not install an internal component by yourself. Expanding Your Computer...
CHAPTER Using BIOS Setup System Configuration Utility (SCU) is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.
When and How to Use BIOS Setup When to Use You need to run SCU when: You see an error message on the screen requesting you to run SCU. You want to restore the factory default settings. You want to modify some specific settings according to the hardware. You want to modify some specific settings to optimize system performance.
Moving Around and Making Selections You must go through two or three levels to complete the setting for an item. In most cases, there are three levels: menu title, pull-down menu, and submenu. Use the keyboard to move around and make selections. Keyboard information can be found at the bottom of the screen.
Startup Menu The Startup menu contains the basic configuration settings of the system, as well as the security settings, which safeguard your system against unauthorized use. Date and Time sets the system date and time. Boot Password allows you to set the password for your system. When typing the password, first make sure that is off, then type your Num Lock...
Chipset Menu The Chipset menu contains the shared video memory settings of the system. Shared Memory sets the shared memory size of the video controller. The options are 16M, 32M, and 64M. Default setting is 64M. Using BIOS Setup...
Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Boot Sequence sets the first, second, third, and fourth booting device. The system will try to boot from the first device but if it is not available, will try the next boot device.
Exit Menu The Exit menu displays ways of exiting SCU. After finishing with your settings, you must save and exit so that the new settings can take effect. Save and Exit saves the changes you have made and exits SCU. Exit (No Save) exits SCU without saving the changes you have made.
CHAPTER Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the CD supplied with your computer.
How to Use the Driver CD NOTES: The drivers may have been updated after this manual was published. For driver’s upgrade, please contact your dealer. This CD supports Windows XP only. You are recommended to install Windows XP Service Pack 2. The available items may differ according to your computer model.
Page 71
Name / Icon Description INSTALL DRIVER Allows you to manually install the intended driver. (See the next section for details.) Automatic Install Allows you to start the automatic driver installation. Driver Installs the Adobe Acrobat Reader program if you do not have it on your computer.
Manually Install Drivers To manually install the intended driver, click on on the DRIVER INSTALL initial screen and the following screen appears: Click on the corresponding icon on the left side and installation will start. The icons and drivers are described next: Icon Name Description...
Page 73
Icon Name Description Audio Installs the audio driver that allows you to take full driver advantage of the audio subsystem. Modem Installs the modem driver that allows you to use the driver modem function of the computer. LAN driver Installs the LAN driver that allows you to use the network function of the computer.
CHAPTER Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer How to clean the computer What to note when using the battery pack...
Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use.
Using an Anti-Virus Strategy New viruses are always being developed nowadays and they are attacking computers even more easily with emails so commonly used worldwide. You can install a virus-detecting program to monitor potential viruses that could damage your files. Caring for the Computer...
Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 10 °C (50 °F) and 35 °C (95 °F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.
Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.
When Traveling Before traveling with your computer, make a backup of your hard disk data into floppy disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed.
CHAPTER Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems. It is divided into three sections: Preliminary checklist Solving common problems Resetting the computer...
Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.
Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 DVD Drive Problems P. 8-4 Display Problems P. 8-5 Hardware Device Problems P. 8-6 Hard Disk Drive Problems P. 8-7 Keyboard, Mouse, and Touchpad Problems P.
Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly.
You cannot eject a disc. The disc is not properly seated in the drive. Manually release the disc following the method described next: 1. Turn off the system. 2. Insert a small rod, such as a straightened paperclip, into the drive’s manual eject hole and push firmly to release the tray.
Bad dots appear on the display at all times. A small number of missing, discolored, or bright dots on the screen are an intrinsic characteristic of TFT LCD technology. It is not regarded as a LCD defect. Resolution cannot be adjusted to desired setting. Make sure that the video driver is installed correctly.
Hard Disk Drive Problems The hard disk drive error message appears on the screen. The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow. The data files stored on the hard disk drive may be fragmented. Use a tool such as Window’s Disk Defragmenter to defragment the files.
LAN Problems I cannot access the network. Make sure that the LAN driver is correctly installed. Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct.
Make sure that the SSID setting is the same for every WLAN device in the network. Your computer is not recognizing changes. Restart the computer. Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured.
Make sure that the telephone line is properly connected. Make sure that the COM port in the communication software is correctly set. Turn off power management. PC Card Problems The PC card does not work. Make sure that the PCMCIA driver is correctly installed. Make sure that the PC card is correctly seated.
The computer does not resume from Standby or Hibernation mode. The computer automatically enters Standby or Hibernation mode when the battery pack is empty. Do any one of the following: − Connect the AC adapter to the computer. − Replace the empty battery pack with a fully charged one. The computer does not enter Hibernation mode with the keys.
Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound. The sound system does not record. Adjust the playback or recording sound levels. The external microphone or audio device does not work.
If this message appears when you are booting from the hard disk, insert a bootable disk in the floppy disk drive and check the condition of the hard disk. The message “Invalid system disk” or “Disk error” appears on the screen after you turn on the computer.
Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data.
APPENDIX Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications Intel Mobile Celeron-M processor with 400 MHz Front Side Bus Cache Memory 1 MB ROM BIOS 512 KB Flash EEPROM (includes system and VGA BIOS), ACPI Plug-and-Play capability System 2 ×...
Page 96
Parts Specifications Weight 2.9 kg Operating: 0 °C (32 °F) to 35 °C (95 °F) Environment Temperature Storage: –20 °C (–4 °F) to 60 °C (140 °F) Humidity Operating: 10 % to 90 % non-condensing Storage: 5 % to 95 % non-condensing Specifications...
APPENDIX Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix.
On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
Page 100
ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ.
About the Modem Caution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines.
On the Use of RF Device NOTE: The information in this section applies to models with the wireless LAN module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 103
The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.
Page 104
EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.
Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé...
Page 106
Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
Page 107
General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “How to Turn Off the Wireless LAN.”...
Page 108
Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card.