Hand Held Products Nautiz X5 Quick Start Manual page 4

3 Connecting/Disconnecting battery
The pictures shown below may differ from the actual products.
To purchase additional or optional products, contact our customer
center.
To connect the battery
1 Align the battery to the
groove and insert in the
direction of the arrow.
2 Turn the fixing pins on both
sides of the battery pins
inward until the battery is
secured.
To disconnect the battery
1 Power off the PDA.
2 Turn the fixing pins on both
sides of the battery pins
outward to disconnect the
battery.
3 Pull out the battery after
lifting it in the direction of
the arrow.
Removing battery without power off may cause a technical problem.
Turn off a PDA by using [Power] button on PDA completely to prevent
causing problem of PDA.
When PDA is failing to turn on due to removing battery witout turn off,
please make hard-reset the PDA.
Please press (# button + Enter button + Reset button) at the same time.
All information from Memory (RAM) will be all deleted after hard-reset.