Specifications - Aiwa SIMPLE-2 NSX-WVT99 HR Service Manual

<FM Tuner section>
Tuning range
Usable sensitivity(IHF)
Antenna terminals
<MW Tuner section>
Tuning range
Usable sensitivity
Antenna
<SW Tuner section>
Tuning range
Antenna
<Amplifier section>
Mid-high frequency amplifier Front
Power output*
Total harmonic distortion 0.3 % (40 W, 1 kHz, 8 ohms,
LOW FREQ+SUB WOOFER amplifier
Power output*
Total harmonic distortion 0.3 % (100 W, 75 Hz, 6 ohms,
Inputs
Outputs
<Cassette deck section>
Track format
Frequency response
Signal to noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
531 kHz to 1602 kHz (9 kHz step)
530 kHz to 1710 kHz (10 kHz step)
350 uV/m
Loop antenna
5.73 MHz to 17.9 MHz
Wire antenna
Rated: 80 W + 80 W
(8 ohms, THD 1 %,1 kHz )
Reference: 100 W + 100 W
(8 ohms, THD 10 %,1 kHz )
DIN AUDIO)
Rated: 200 W + 200 W
(8 ohms, THD 1 %,75 Hz )
Reference: 250 W + 250 W
(6 ohms, THD 10 %,75 Hz )
DIN AUDIO)
Rear (Surround)
Rated: 80 W + 80 W
(8 ohms, THD 1 %,1 kHz )
Reference: 100 W + 100 W
(8 ohms, THD 10 %,1 kHz )
Center
Rated: 80 W (8 ohms, THD 1 %,
1 kHz )
Reference: 100 W (8 ohms, THD
10 %,1 kHz )
VIDEO/AUX: 300 mV (adjustable)
MD: 300 mV (adjustable)
MIC 1, MIC 2:1.0mV (10 kohms)
5.1CH INPUT:
FRONT (L,R): 240 mV
SURROUND (L,R): 240 mV
CENTER: 600 mV
SUB WOOFER: 240 mV
LINE OUT: 150 mV
VIDEO OUT: 1.0V p-p (75 ohms)
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or more
SPEAKERS (LOW FREQ +SUB
WOOFER): accept speakers of 6
ohms or more
SURROUND SPEAKERS: accept
speakers of 8 ohms to 16 ohms
CENTER SPEAKER: accept
speakers of 8 ohms or more
PHONES (stereo jack) : accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
CrO2 tape: 50 Hz – 16000 Hz
Normal tape: 50 Hz – 15000 Hz
60dB (Dolby B NR ON, CrO2 tape
peak level)
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/Playback head
x 1, erase head x 1

SPECIFICATIONS

<Compact disc player section>
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Video signal
Video data
Audio data
<Speaker system SX–WWVT79>
Cabinet type
Speakers
Impedance
Output sound pressure level 87 dB/W/m
Dimensions (W x H x D)
Weight
<Speaker system SX-R2700>
Speakers
Impedance
Dimensions (W x H x D)
Weight
<Speaker system SX–C2700>
Speakers
Impedance
Dimensions (W x H x D)
Weight
<General>
Power requirements
Power consumption
Dimensions of main unit
(W x H x D)
Weight of main unit
Standby power consumption
If the power-economizing mode is OFF: 47 W
If the power-economizing mode is ON: 0.9 W
• Design and specifications are subject to change without
notice.
• Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
"DOLBY" and the double-D symbol
Laboratories Licensing Corporation.
• The word "BBE"and the "BBE symbol" are trademarks of BBE
Sound, Inc.
Under license from BBE Sound,Inc.
– 2 –
Semiconductor laser (λ =780 nm)
1 bit dual
83 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Crystal accuracy
NTSC/PAL color format
(selectable)
MPEG 1
MPEG 1, LAYER 2
4 way, built-in subwoofer
(magnetic shielded type)
Subwoofer :
200 mm ( 7 7 / in.) cone type
8
Woofer :
120 mm (4 3 / in.) cone type
4
Tweeter :
3
60 mm ( 2 / in.) cone type
8
Super Tweeter :
20 mm ( 13 / in.) ceramic type
16
6 ohms / 8 ohms
260 x 383 x 326 mm
1 1 7
(10 / x 15 / x 12 / in. )
4 8 8 .
7.5 kg (16 lbs 9 oz)
Full range:
100 mm x 2, cone type
8 ohms
120 x 230 x 110 mm
3 1
(4 / x 9 / x 4 in. )
4 8 .
1.2 kg (2 lbs 10 oz)
Full range:(Magnetic Shielded Type)
100 mm x 2, cone type
8 ohms
360 x 120 x 110 mm
(14 1 / x 4 3 / x 4 in. )
4 4 .
1.9 kg (4 lbs 3 oz)
120V/220-230 V/240 V AC
switchable, 50/60 Hz
390W
300 x 383.5 x 380 mm
7 1
(11 / x 15 / x 15 in.)
8 8
18 kg (39.6 lbs )
are trademarks of Dolby