Before You Start - Tricity Bendix TDF10 Instruction Manual

Unpacking
In the box you should find: The deep fryer ; Frying basket; Fryer element; Removable oil
tank; Detachable lid with three filters.
If any items are missing or damaged, contact your nearest Tesco store for assistance.
Retain the packaging. If you dispose of it do so in accordance with any recycling regulations
in your area.
Positioning the Deep Fryer
Site your Deep Fryer on a firm, flat, heat-resistant work surface. Steam given off by the
cooking process may mark or damage anything above or around the fryer; keep these areas
clear. In order to avoid any fire hazards keep areas above and around the fryer clear. Leave a
clear space all round the fryer, and keep it away from the front edge of the work surface .
Unwrap the power cord. Place the fryer near a wall socket. Do not put the fryer or the power
cord close to any cooking or heating appliance.
Preparation:
Before using your fryer for the first time:
1: Carefully wash the appliance.
The body of the appliance should be wiped with a wet
cloth and then carefully dried.
The oil tank, the frying basket and the appliance lid
should be well washed in warm soapy water, rinsed
thoroughly and then carefully dried.
Remove all filters before washing the lid. Lift up the
filter cover as shown. Remove the filters. Wash the
appliance lid and filter cover and then dry fully.
Replace the filters and the filter cover only when the
lid is dry.
Removing the element:
Lift the control unit carefully off the fryer.
To replace the element:
Align the element with the guides in the fryer
and slide the element into place. There is a safety
switch which prevents the fryer from operating if
the control unit is not properly inserted.
Cleaning the element:
Remove the control unit. Dip the element in
warm soapy water, Lightly brush the surface with
a soft cleaning brush. Repeat using clean water
and then dry with a towel or kitchen paper.
NEVER allow water to contact the control unit
or power cord.
If you need to clean the control unit, wipe it with
a barely damp cloth and then dry fully before op-
erating the fryer.
After cleaning, replace the the element.
Attach the Basket Handle

Before You Start