Download Print this page

Videocon V1524 User Manual page 15

Advertisement

Call Settings
Dual SIM Settings
You have following options listed under Dual SIM settings:
Standby Mode: Allows you to activate SIM1, SIM2 and Flight mode.
Reply by Original SIM: Allows you to reply to a SMS, call or MMS by the same SIM, on which you have received the
SMS, call or MMS.
Set SIM Name: You can give name to both the SIM cards according to your choice.
Set dual SIM Call Divert: You can set dual SIM call divert using this feature.
Call Divert
This feature allows you to divert incoming calls from SIM1/SIM2 to voice mail or another phone number. You can activate/deactivate
this function to all calls, voice calls, and check the query status for options. The sub-options available for each function are, call
forwarding unconditional, call forwarding on busy, call forwarding on no reply, divert if unreachable, and cancel all diverts. This is
network provider dependent service.
Call Waiting
You can activate this function to answer an incoming call in between an existing active call. Under query status, you can view the current
activation or deactivation status.
Call Barring
Use this function to restrict the calls you make or receive with your device. Under call barring, the options are outgoing calls and
incoming calls. You can also cancel all call barring. To change the barring password, you may required to put the old password. In order
to activate this service, you need to check the availability with your network service provider.
Reject Call Time: You can set the time to reject call using this feature.
Caller ID:
Enables you to display Own ID, Display ID by network of the caller ID of the phone. It is a network based service.
Others
Enable you to set others settings. The options are:
Call Time Minute Reminder: Set this function to On or Off to receive a warning tone after selected time in the call.
Auto Redial: You can select On or Off to redial the number automatically when a call is not connected.
Vibrate when connected: Activate this function to receive a vibration notification when your call is connected.

Advertisement

loading