Adjust The Phase - Clarity WN-5220-S User Manual

Clarity Visual Systems
2. Display an image containing
many on/off (black/white)
transitions
3. Press the remote control FREQ
button
4. Press the left/right arrow keys
5. Press PREV MENU

Adjust the Phase

This setting is important for computer input. It has no effect with
Composite or S-Video sources.
Use the PHASE button to adjust the phase of the internal sampling
clock relative to the incoming data. This adjustment is usually not
November 1998
32
Source Select
Frequency
Phase
Input Level
Position
Zoom
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
A checkerboard pattern works well.
One of the "fill" patterns in Windows 95 Paint has
this. Start Paint program found under Accessories.
Select Image, Attributes, Black and White, OK, Yes.
Select View and see that Color Box is checked.
Choose the Fill tool (paint jar spilling over). In the
bottom row of black/white shades, click the 9
from the left. Click in the drawing area. Choose
View, View Bitmap to fill the computer screen with
this pattern.
With Sharpness enabled, if the FREQ setting is not
correct and does not match the input source, you will
see large vertical bands in the pattern.
The FREQ adjustment menu is displayed.
The vertical bands will disappear when the frequency
matches the incoming signal.
Exit the FREQ menu.
Phase Select
028
th
box