Site Requirements; Power - Clarity WN-5220-S User Manual

Clarity Visual Systems
Height x Width
Number of display units
Screen Height, inches
Screen Width, inches
Weight, pounds
115 Volts A/C Input
Current, amps
Power, watts
Heat, BTU/hr
Air Cond., tons
230 Volts A/C Input
Current, amps
Power, watts
Heat, BTU/hr
Air Cond., tons

Site Requirements

Power

Make sure the power cord is compatible with the nominal power
source used with the WN-5220-S display.
Power Consumption
Power consumption of the WN-5220-S is 920 Watts, or approximately
8 Amps current draw at 115 VAC (4 Amps at 230 VAC). The
WN-5220-S can be configured to operate on either 90-130 VAC or
180-260 VAC nominal power sources at 50/60 Hz.
Voltage Range
The operating voltage range of the WN-5220-S is set via a switch on
the power supply near the AC power plug and on/off switch.
Operation of the display at the incorrect voltage level can cause
damage to the unit which is not covered by the warranty.
!" Select the setting labeled 115V if your power source is
!" Select the setting labeled 230V if your power source is
If the input voltage drops below approximately 85V (170V if the
WN-5220-S is set to the 230V setting) the display will automatically
shut down to protect itself.
November 1998
10
1x1 1x2
Single 2 displays 4 displays
31.3 31.3
41.7 83.4
120 240
8 16
920 1840 3680
2827 5655 11,310
.24 .47
4 8
920 1840 3680
2827 5655 11,310
.24 .47
Table 1
between 90 and 130 Volts AC.
between 180 and 260 Volts AC.
2x2 2x3 3x3
6 displays 9 displays
62.6 62.6 93.3
83.4 125.1 125.1
480 720 1080
32 48 72
5520 8280
16,965 25,448
.94 1.41 2.12
16 24 27
5520 8280
16,965 25,448
.94 1.41 2.12
3x4 4x4
12 displays 16 displays
93.9 125.2
166.8 166.8
1440 1920
96 128
11,040 14,720
33,931 45,241
2.83 3.77
48 64
11,040 14,720
33,931 45,241
2.83 3.77