Cleaning The Exterior - AGFA Drystar 5500 User Manual

Cleaning the exterior

1
Switch off the Drystar 5500 by following the procedure as described in
'Switching off the Drystar 5500'
2
Remove the power plug from the socket.
3
Wipe the exterior of the printer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based cleaner.
Be careful not to get any liquid in the power cord port.
4
Plug in the printer and switch it on by following the procedure as described in
'Switching on the Drystar 5500'
50
Advanced operation (key-operator mode)
on page 28.
on page 26.
2901B EN 20040413