Table of Contents
Advertisement
Connect the FAST wiring connectors to the corresponding original connectors on the motorcycle, matching the colors of
the connectors and making sure that the connection is properly made and is in no way loose.
GB
Fig. 6
The connector of the neutral gear sensor is NOT used. We recommend you to protect it with adhesive tape.
NOTE: where the colors of the FAST wiring connectors do not match the colors of the connectors of the original wiring,
refer to the colored guides used to identify the connection correspondence (for example: colored paint dot) .
Re-assemble the R.H. panel by following in reverse order the operations described at item 8 "REMOVING THE FAIRING".
NOTE: If the battery is present, re-connect it
12
Hide quick links:
Advertisement
Table of Contents
