KTL cctv DVR 9010 User Manual page 36

◆ Video
This sub-menu allows you to set the video quality and PPS (Picture Per Second) (Figure7).
<Figure 7>
8. GET ID
Press this button to show the DVR ID on the screen.
9. DVR Password
Each password contains 4 characters. If you want to enter DVR menu or enter
playback mode, you have to enter correct password. You need to key the password in the
field then press "send" button before you enter DVR menu or playback mode.
The password shown on screen will not change but you are already able to enter DVR
main menu to change settings or to enter playback mode.
10. Channel Buttons
The number of channel buttons corresponds to the number of channels supported by the unit.
Press one of these buttons to view the channel full screen.
If you want to select DVR menu item, you don't have to do it by
Note:
directional key. You can use Channel Buttons instead. For example, if you want to select
menu item 3 Monitor, you can just press Channel Button "3" on the right side.
00-37963-ACEB4
35