KTL cctv DVR 9010 User Manual page 33

Through the control panel, users can control and setup the settings of DVR and
connected speed dome remotely.
1. Zoom In/ Zoom Out
If the DVR has connected to dome cameras, the two buttons are pressed for
zooming in and out.
2. Iris Near/ Iris Far
These two buttons are used for controlling the iris lens. Proper adjustment will ensure the
correct exposure depending on the camera's situation and the lighting levels.
3. Direction buttons
a. If the "Pan/ Tilt" (check box) is enabled (default), these buttons can be used to pan/ tilt the
connected dome cameras. Choose a wanted camera through "P/ T/ Z ID" before you tried to
pan/ tilt it.
b. If the "Pan/ Tilt" (check box) is disabled, these buttons can be used to select OSD menu
items of speed dome camera.
4. Menu/ Enter
In normal status, press this button to enter the OSD menu of connected speed dome camera.
This button is used as "Enter" button while in OSD menu mode.
5. Step Degree
Users can set the step degree of dome camera. You can choose form 1~15 degree.
6. DVR-related buttons
Please refer to page 6 for the descriptions of these button functions. The password is required
before entering the DVR menu through Internet.
7. Sever
Press this button to go to the sever-related menu (figure 1). Users can modify the sever settings
in this menu.
00-37963-ACEB4
<Figure 1>
32