Lincoln Electric INVERTEC STT Series Service Manual page 105

F-64
CAPACITOR REMOVAL AND REPLACEMENT PROCEDURE (continued)
17. Remove the two 7/16" hex bolts that hold the
capacitor to the switch board. See Figure
F.36.
FIGURE F.37 – LOOSENING THE CLAMP RING SET SCREW
17. Remove the two 7/16" hex bolts that hold the
capacitor to the switch board. See Figure
F.36.
TROUBLESHOOTING & REPAIR
FIGURE F.36 – REMOVING CAPACITOR NUTS
INVERTEC STT
18. Loosen the set screw of the capacitor clamp
ring and remove the capacitor from the clamp
ring. See Figure F.37.
18. Loosen the set screw of the capacitor clamp
ring and remove the capacitor from the clamp
ring. See Figure F.37.
F-64