Bluetooth - Samsung WE VoIP User Manual

Dialing (Sending DTMF)
During a WE VoIP call, DTMF is sent when each keypad button is pressed.
The location of buttons and menus may vary depending on application version.
Also, some menus may not be supported depending on the PBX settings.

Bluetooth

You can use a paired Bluetooth headset for WE VoIP calls.
If there is a Bluetooth headset paired while you are in a call, the Bluetooth button is
activated as illustrated below. Tap the Bluetooth button while in a call to toggle
between the phone speaker/mic and the Bluetooth headset.
- If you want to pair a Bluetooth device while in a call, tap the [Bluetooth] button
to go to the Bluetooth pairing screen. After searching for a Bluetooth device and
pairing it on the Bluetooth pairing screen, you can use the Bluetooth headset for
all calls.
- The pairing procedure of a Bluetooth device may vary depending on the
Bluetooth device. For details, refer to the user manual provided by the Bluetooth
device manufacturer.
26
_ © SAMSUNG Electronics Co., Ltd.