Sound Setup; Eq3 Prst (Eq3 Preset); Eq3 Low, Eq3 Mid, Eq3 High - Sony DSX-A35U Operating Instructions Manual

BLK OUT (black out)
Turns off the illumination automatically for
any source (e.g., during radio reception,
etc.) if no operation is performed for 5
seconds: [ON], [OFF].
To turn the light back on, press any button
on the unit. (When activated, remote
operation is unavailable.)
DEMO (demonstration)
Activates the demonstration: [ON], [OFF].
DIMMER
Changes the display brightness: [ON],
[OFF].
AUTO SCR (auto scroll)
Scrolls long items automatically: [ON],
[OFF].
REPEAT (page 10)
LOUDNESS (dynamic loudness)
Reinforces bass and treble for clear sound
at low volume levels: [ON], [OFF].
BTM (page 8)

Sound Setup

EQ3 PRST (EQ3 preset)

Selects an equalizer curve from 7 equalizer
curves or off: [XPLOD], [VOCAL], [EDGE],
[CRUISE], [SPACE], [GRAVITY], [CUSTOM],
[OFF].
The equalizer curve setting can be
memorized for each source.

EQ3 LOW, EQ3 MID, EQ3 HIGH

Sets [CUSTOM] of EQ3.
Customizes the equalizer curve.
The volume level is adjustable in 1 dB
steps, from -10 dB to +10 dB.
BALANCE
Adjusts the sound balance: [RIGHT-15
(R15)] – [CENTER (0)] – [LEFT-15 (L15)].
FADER
Adjusts the relative level: [FRONT-15 (F15)]
– [CENTER (0)] – [REAR-15 (R15)].
AUX VOL (AUX volume level)
Adjusts the volume level for each
connected auxiliary device:
[+18 dB] – [0 dB] – [-8 dB].
This setting negates the need to adjust
the volume level between sources.
13
GB