Every 200 Hours; Replacing Engine Oil Filter Cartridge - Kubota GR2020G Operator's Manual

EVERY 200 HOURS

BReplacing Engine Oil Filter Cartridge
To avoid serious injury:
A Be sure to stop the engine and remove the key
before changing the oil and the oil filter
cartridge.
A Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
1. The oil filter cartridge must be changed every 200
service hours.
2. Apply a slight coat of oil onto the rubber gasket of new
cartridge.
3. Tighten the filter quickly until it contacts the mounting
surface.
[GR2020G]
Tighten filter by hand.
[GR2120, GR2120AU]
Tighten filter by hand an additional 1/2 turn only.
4. After the new cartridge has been replaced, the engine
oil level normally lowers a little. Add engine oil to
proper level. Check for oil leaks around filter gasket.
A To prevent serious
replacement element of the recommended type must
be used. Use only a genuine KUBOTA filter or its
equivalent.
(1) Engine oil filter cartridge
damage to the engine,
PERIODIC SERVICE
(1) Engine oil filter cartridge
63