Table of Contents
Advertisement
32
Reference
To manually set up your monitor
Select Quick Setup from the Main Menu.
1
Select Custom
2
An incorrect Monitor Type setting may damage your
monitor. Review your monitor specifications before making
a selection from the Monitor Selection Menu.
A scrambled screen indicates your monitor is not capable of
the selected display mode. Immediately press
If the monitor produces a scrambled display, try a lower
refresh rate. If it is already at the lowest refresh rate, set that
resolution to Not Supported.
Pick a resolution, and then a refresh rate.
3
Adjust the size and position of the box outline on the screen, and
4
press
Repeat steps 3 and 4 until you are satisfied with the box outline
5
for all the resolutions.
When finished, press ESC and save the settings.
6
If you have not installed an enhanced driver on your system, see
Installing ATI's Enhanced Drivers on page 11.
ATI Multimedia Channel
The ATI Multimedia Channel (AMC) connects ATI's MPEG
decoder, TV tuner, or video capture modules to the
3D XPRESSION card.
While the AMC provides VGA Feature Connector (VFC)
compatibility, it also provides enhanced features for new
multimedia devices including serial control and provision for
audio.
The AMC connector shares the same footprint with the VFC
but it adds pins for supporting additional multimedia modes.
Great caution should be taken when connecting a ribbon cable
to the AMC/VFC connector. Some of the pins carry power
and any improper use can result in damage both to the
graphics card and the upgrade board.
.
to accept.
ENTER
to exit.
ESC
Advertisement
Table of Contents
