Repacking Instruction - McIntosh C2500 Service Manual

REPACKING INSTRUCTION

In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
It is very important that the four plastic feet
below.
are attached to the bottom of the equipment. Four 1/4
- 20x2-1/4 inch screws and washers must be used to
fasten the unit securely to the bottom pad and wood
skid. This will ensure the proper equipment location on
the bottom pad. Failure to do this will result in shipping
damage.
Use the original shipping carton and interior parts only if they
are all in good serviceable condition. If a shipping carton or
any of the interior part(s) are needed, please call or write Cus-
tomer Service Department of McIntosh Laboratory. Refer to
page 3. Please see the Part List for the correct part numbers.
( )
Quantity Part Number
1 033888
4 033887
1 033697
1 034414
1 034301
4 017937
4 400159
4 404080
93
C2500
Description
Shipping carton
End Cap
Inner carton only
Top pad (foam)
Bottom pad
Plastic foot
#10-32 x 3/4" screw
#10-7/16" Flat washer