Only For Training And Service Purposes - LG KG290 Service Manual

3. TECHNICAL BRIEF
The backlight of LCD module is controlled by AD6721 via AAT3155 , U603. The control
signals related to Backlight LED are given bellow.
Signals
MLED
LCD_DIM_CTL
MLED[1:3]
Table 3-3. DESCRIPTION OF LCD BACKLIGHT LED CONTROL
C. RF interface
The AD6721 control RF parts through PA_BAND, ANT_SW1, ANT_SW2, ANT_SW3 , CLKON ,
PA_EN, S_EN, S_DATA, S_CLK
Signals
PA_BAND (GPO 17)
ANT_SW1 (GPO 9)
ANT_SW2 (GPO 10)
PA_EN (GPO 16)
S_EN (GPO 19)
S_DATA (GPO 20)
S_CLK (GPO 21)
LGE Internal Use Only
Current source for backlight LED
Control LCD backlight level in 16 steps
This pins are returned-paths for backlight LED current source (MLED)
PAM Band Select
Antenna switch Band Select
Antenna switch Band Select
PAM Enable/Disable
PLL Enable/Disable
Serial Data to PLL
Clock to PLL
Table 3-4. RF CONTROL SIGNALS DESCRIPTION
- 24 -
Description
Description
Copyright © 2007 LG Electronics. Inc. All right reserved.

Only for training and service purposes