LG MFL06206505 Installation Instructions Manual page 11

STEP 3: Prepare The Venting Blower
ROOM-VENTING (Recirculating)
INSTALLATION:
1. Remove one or two blower unit mounting screw(s)
and one or several blower plate mounting screw(s).
Remove the blower plate. See Figure21.
2. Carefully lift the blower unit out of the microwave
See Figure 14.
oven.
3. Reassemble the blower wire. See Figure 22.
4. Rotate blower unit 90° so the exhaust ports face
the front of the cabinet. See Figure 23.
5. Place blower unit back into microwave oven.
Be sure the wires are not pinched. See Figure 24.
6. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw
and then the one or several blower plate
mounting screw(s). See Figure 25.
Figure 23
Blower Unit
– 11 –
Blower Unit
Parts B
Figure 21
Figure 22
Blower Unit
Parts B
Figure 25
Blower Plate
Mounting Screw
Blower Plate
Back Plate
Blower Unit
Mounting Screw
Figure 24
Blower Plate
Mounting Screw
Blower Plate
Back Plate
Blower Unit
Mounting Screw